,

Anycubic Vyper 3d

$350.00 Sales tax

Thanks to its self-developed Bowden extruder, Anycubic Vyper can reach a maximum print speed of 7.1in./s or 180mm/s and a typical print speed of 3.1in./s or 80mm/s, which is 167% faster than its rivals’ 1.2in./s or 30mm/s and 33% faster than others’ 2.4in./s or 60mm/s. Equipped with a new 32-bit motherboard and a high-performance Cortex -M3 architecture main control chip, Vyper features faster computing speed and smoother system. The integration of TMC2209 silent driver makes the motherboard have both silent printing and precise voltage output control, which ensures a more accurate and silent printing.

Availability: 11 in stock

Report Abuse

Big Platform for Big Dreams

With a total area of > 90in² / 60,000mm², Anycubic Vyper’s 245mm build platform is 24% larger than its rivals’ 220mm square platform. A larger print platform brings greater freedom, allowing you to unleash your creativity freely.

Anycubic Vyper - Big Platform for Big Dreams

For Freedom to Make

Thanks to its large print platform, Anycubic Vyper can print up to 10.2 x 9.6 x 9.6 in. / 260 x 245 x 245 mm at a time, similar dimensions to a size 7 standard basketball. 4.1 gal. / 15.6 L total build volume leaves enough space and freedom for you to make any shapes of cubic.

Anycubic Vyper - For Freedom to Make

Leveling Goes Automatic

Leveling is the 1st step in 3D printing and a key step to final success. Anycubic Vyper is one of the very few 3D printers that has auto leveling feature under the price segment of $400. 16-point precise auto leveling both greatly simplifies your print preparation and improves your print success rate.

Anycubic Vyper - Leveling Goes Automatic

Large Screen, Convenient Control

4.3″ screen is 51% larger in screen area than a 3.5″ ; LCD display is more colorful, transparent and brighter than traditional TFT screen; touch control on LCD is more sensitive than TFT and more intuitive than knob control. Anycubic Vyper brings you the best viewing and operating experience with its 4.3″ LCD touch-control screen.

Anycubic Vyper - Large Screen, Convenient Control

Print Quickly Without Waiting

Thanks to its self-developed Bowden extruder, Anycubic Vyper can reach a maximum print speed of 7.1in./s or 180mm/s and a typical print speed of 3.1in./s or 80mm/s, which is 167% faster than its rivals’ 1.2in./s or 30mm/s and 33% faster than others’ 2.4in./s or 60mm/s. Equipped with a new 32-bit motherboard and a high-performance Cortex -M3 architecture main control chip, Vyper features faster computing speed and smoother system. The integration of TMC2209 silent driver makes the motherboard have both silent printing and precise voltage output control, which ensures a more accurate and silent printing.

Anycubic Vyper - Print Quickly Without Waiting

Assemble in Minutes

Building up a 3D printer is often time-consuming and labor-intensive. Anycubic Vyper adopts modular design with 4 major modules pre-assembled. Thus, instead of wasting hours putting together small pieces, Anycubic Vyper can be easily assembled in minutes.

Anycubic Vyper - Assemble in Minutes

Remove with Bare Hands

Removing models from a heated bed with a steel shovel often leads to a dilemma: Too much force may damage the model and the platform, while too little force can’t separate them. On Anycubic Vyper, this won’t be a problem anymore. With its magnetic and flexible spring steel platform design, you can remove the models easily with your bare hands simply by taking off the entire platform and then bend it.

Anycubic Vyper - Remove with Bare Hands

Worry-Free Maintenance

Carborundum glass platform often get arching and uneven after using for some time, and affect subsequent printings. In order to solve this problem, Anycubic Vyper selected PEI stainless spring steel, which can remain flat for decades, beside it’s rust-proof and completely maintenance-free.

Anycubic Vyper - Worry-Free Maintenance

Anycubic Vyper
Models Display

Anycubic Vyper - Sample Prints

Anycubic Vyper

Tech Specs

Machine Weight
10kg
Machine Dimensions
516x508x457mm(HWD)
Print Resolution
±0.1mm
Printing Dimensions
260x245x245mm(HWD)
Positioning Accuracy
X/Y 0.0125mm; Z 0.002mm
Extruder Number
Single
Nozzle Size
0.4mm
Hotbed Temperature
≤230F/110℃
Printing Speed
≤180mm/s (recommended 80mm/s)
Ambient Operating Temperature
8°C – 40°C
Operational Nozzle Temperature
≤260°C
Operational Hot Bed Temperature
≤110°C
Input Voltage
100V/240V AC, 60/50Hz
Output Voltage
24V/14.6A (350W)
Printing Material
PLA/ABS/PETG/TPU/Wood
Input Formats
.STL, .OBJ, .AMF
Output Formats
GCode
Connection Mode
Trans-flash Card; USB cable(expert users only)

Anycubic Vyper
In The Box

Reviews

There are no reviews yet.

Be the first to review “Anycubic Vyper 3d”

Your email address will not be published. Required fields are marked *

Product Enquiry

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy

Shopping Cart
Scroll to Top